MT-10® lubrication technology is based on tribologic methods that improve lubricity and load-carrying capacity by improving metal surface characteristics and creating a stable, chemical, corrosion-controlled, halide boundary film. MT-10® is a blend of highly refined oils and proprietary additives and contains no solid lubricants, chlorinated solvents or phosphate compounds. Once applied,MT-10® provides five mechanisms of improvement:
- Advanced chemical boundary film formation through reactive chemical bonding;
- Ring opening, oxirane acid scavenging and advanced corrosion inhibition;
- Organo-metallic substitution of surface metal and free radical reactionaries;
- Improved metal surface smoothness and rolling out of irregular contacting asperities; and
- Re-hardening and latticular reconstruction of initial contacting metal surfaces.
The high & low surfaces of the metal before the addition MT-10® are shown in the diagram below on the left. The image on the right depicts the metal after the addition of MT-10® - showing improved metal surface, film strength & shear.
RECOMMENDED USES
MT-10® is recommended for personal, commercial and fleet automobiles and trucks in these applications:
- Engines - gasoline & diesel
- Power steering/rack assembly units
- Differentials
ENGINES
No need to displace the oil - just add MT-10® to the engine oil reservoir. MT-10® promotes protection and will not build up or change tolerances.
- Polishes, seals & protects metal surfaces of bearings, pistons, cam, crankshaft, lifters & all other internal, moving metal parts
- Reduces friction-related heat & wear
- Enhances engine performance
- Increases horsepower
- Lowers operating temperatures
- Reduces oil consumption
- Improves fuel mileage
- Extends engine life
- Recommended for gasoline & diesel engines
POWER STEERING/RACK ASSEMBLY UNITS
- Polishes, seals & protects treated metal surfaces
- Protects against friction-related heat & wear
- Reconditions rack piston & cylinders
- Returns smooth & easy operation to the unit
NOTE: If you are experiencing difficulty with the unit, we recommend thoroughly flushing the unit prior to adding MT-10®.
DIFFERENTIALS
- Polishes, seals & protects metal surfaces of the gears
- Protects against friction-related heat & wear
- Optimizes performance for more power
- Extends differential life
NOTE: Limited slip additive is still required with the use of MT-10®.
NOTE: Muscle products are not intended to cure mechanical failures.
